CSI Ningdong G300 Series Marine Diesel Generator Set (1000 – 2000kW)

Standard and Optional Parts

Absorber: standard

Cylinder freshwater heater: standard for self-start engine

Pregreasing pump: standard for self-start engine

Governor: electronic governor (standard)

Silencer: optional

Lifting device: standard

Parameters Table

Item Unit Technical Parameters
Engine Type   Four-stroke, water-cooled, in-line, turbocharged and intercooled, direct injection
Cylinder Bore × Stroke mm 300 × 380
No. Cylinder   6 / 8
Revolution rpm 500 – 600
Compression Ratio   13 : 1
SFOC g/kW·h ≤194+3%
SLOC g/kW·h ≤0.6
Cooling System   Closed circulating water cooling
Alignment Method   Flexible coupling
Starting Mode   Compressed air motor
Minimum Height for Lifting Piston mm 2600 (above crankshaft centerline)
NOX Emission Standard   IMO Tier II, GB 15097-2016 1st
Generator Rated Power kW 1000 – 2000
Power Factor    0.8(lagging)


Steady state voltage regulating rate % <±2.5
Transient voltage regulating rate % -15~+20
Stabilization time s <1.5
Voltage fluctuation rate % ≤±1


Steady state frequency (rev.) regulating rate % <5(parallel)
Transient frequency (rev.) regulating rate % ≤±10
Stabilization time s <5
Frequency fluctuation rate % ≤±0.5

Model Portfolio Table

Generator model  

Rated Power






Engine Alternator model Dimensions


Net Weight


Engine model Rated Power


CCFJ1000J(Z) 1000 500/600 G6300ZC6B 1103 Siemens / CMXD 7365×2285×3211 32000
CCFJ1250J(Z) 1250 600 G6300ZC16B 1471 7600×2300×3211 33000
CCFJ1500J(Z) 1500 500 G8300ZC20B 1765 9501×2736×3261 51500
CCFJ1800J(Z) 1800 600 G8300ZC16B 2000 9522×2736×3261 52000
CCFJ2000J(Z) 2000 600 G8300ZC30B 2206 9522×2736×3261 52550


CSI Ningdong G300 Series Marine Diesel Generator Set (01


  1. “CCFJ***J-W**” means conventional generator set, and “CCFJ***Z-W” means self-starting type generator set.
  2. This model portfolio is mainly about 50Hz, 400V, and 60Hz products with corresponding powers that can be also produced according to customer requirements, please contact relevant personnel for specific specifications and technical parameters.
  3. For generator set model selection, please make communicate with relevant personnel.
  4. The delivery scope for each model engine shall be performed as per the corresponding technical files.
  5. Dimensions and weight are for reference only.