CSI Ningdong N230 Series Marine Diesel Generator Set (800 – 1200kW)

Standard and Optional Parts

Absorber: standard

Cylinder freshwater heater: standard for self-start engine

Pregreasing pump: standard for self-start engine

Governor: electronic governor (standard)

Silencer: optional

Lifting device: standard

Parameters Table

Item Unit Technical Parameters
Engine Type   Four-stroke, water-cooled, in-line, turbocharged and intercooled, direct injection
Cylinder Bore × Stroke mm 225 × 320
No. Cylinder   6
Revolution rpm 1000
Compression Ratio   15 : 1
SFOC g/kW·h 194+3%
SLOC g/kW·h ≤0.6
Cooling System   Closed circulating water cooling
Alignment Method   Flexible coupling
Starting Mode   Compressed air motor
Minimum Height for Lifting Piston mm 2400 (above crankshaft centerline)
NOX Emission Standard   IMO Tier II, GB 15097-2016 1
Generator Rated Power kW 800 – 1200
Power Factor    0.8(lagging)
 

Voltage

Steady state voltage regulating rate % <±2.5
Transient voltage regulating rate % -15~+20
Stabilization time s <1.5
Voltage fluctuation rate % ≤±1
 

Frequency

Steady state frequency (rev.) regulating rate % <5(parallel)
Transient frequency (rev.) regulating rate % ≤±10
Stabilization time s <5
Frequency fluctuation rate % ≤±0.5

Model Portfolio Table

Generator model  

Rated Power

(kW)

 

Rated

Speed

(rpm)

Engine Alternator model Dimensions

(mm)

Net Weight

(Kg)

Engine model Rated Power

(kW)

CCFJ800J(Z)-W** 800 1000 N6230ZCD54 882 Siemens / CMXD 6090×2100×3050 21600
CCFJ900J(Z)-W** 900 1000 N6230ZCD36 1000 6220×2100×3050 22400
CCFJ1000J(Z)-W** 1000 1000 N6230ZCD22 1103 6190×2200×3050 22900
CCFJ1100J(Z)-W** 1100 1000 N6230ZCD4 1323 6190×2200×3050 23900
CCFJ1200J(Z)-W** 1200 1000 N6230ZCD 1470 6420×2600×3050 24500

Outline

CSI Ningdong N230 Series Marine Diesel Generator Set 02

Notes:

  1. “CCFJ***J-W**” means conventional generator set, and “CCFJ***Z-W” means self-starting type generator set.
  2. This model portfolio is mainly about 50Hz, 400V, and 60Hz products with corresponding powers that can be also produced according to customer requirements, please contact relevant personnel for specific specifications and technical parameters.
  3. For generator set model selection, please make communicate with relevant personnel.
  4. The delivery scope for each model engine shall be performed as per the corresponding technical files.
  5. Dimensions and weight are for reference only.
RELATE PRODUCTS
Contact